/* ELLE - Copyright 1984, 1987 by Ken Harrenstien, SRI International * This software is quasi-public; it may be used freely with * like software, but may NOT be sold or made part of licensed * products without permission of the author. */ /* * EESITE.H Site-dependent switches & definitions */ /* CONDITIONAL COMPILATION SWITCHES */ #define V6 0 /* Running on V6 system (else V7 assumed) */ #define APOLLO 0 /* Running on an Apollo system */ #define BBN 0 /* Running on BBN system (tty stuff) */ #define BSD4_2 0 /* Running on 4.2BSD system */ #define COHERENT 0 /* Running on Coherent IBM-PC system */ #define DNTTY 0 /* Running on SRI V6 Deafnet system (tty stuff) */ #define HPUX 0 /* Running on Hewlett-Packard System V + */ #define MINIX 1 /* Running on MINIX (IBM-PC) system */ #define ONYX 0 /* Running on ONYX Z8000 system */ #define PCIX 0 /* Running on PC/IX (IBM-PC) system */ #define SUN 0 /* Running on SUN workstation system */ #define SYSV 0 /* Running on Unix System V (or perhaps Sys III) */ #define TOPS20 0 /* Running on TOPS-20 KCC C implementation */ #define UCB 0 /* Running on 2.8, 2.9, or 4.x BSD sys (tty stuff) */ #define VENIX86 0 /* Running on Venix86 (IBM-PC) system */ #define ICONOGRAPHICS 0 /* Using Iconographics configuration version */ #define IMAGEN 0 /* Using Imagen configuration version */ /* Resolve system dependencies */ #if SUN #undef BSD4_2 #define BSD4_2 1 /* SUN uses 4.2BSD */ #endif #if BSD4_2 #undef UCB #define UCB 1 /* 4.2 is special case of general UCB stuff */ #endif /*BSD4_2*/ #if (PCIX || HPUX) #undef SYSV #define SYSV 1 /* PC/IX & HP-UX are based on System III & V (resp) */ #endif /* Set system or site dependent stuff here */ #if V6 #define void int /* May need this for other systems too */ #endif /* Changes to parameters (elle.h) or variable defaults (e_vinit.c) */ #if COHERENT #define EVFNO2 0 /* "Old" filename postfix - use no old file! */ #define EVFNN2 "+" /* "New" filename postfix */ #define TX_COHIBM 1 /* Ensure Coherent IBM-PC console support included */ #endif /*COHERENT*/ #if DNTTY #define EVLLEN 60 /* Short line length for TDDs */ #endif /*DNTTY*/ #if HPUX #define EVFNO2 "~" /* Same as CCA Emacs. Sorts last in listing. */ #endif /*HPUX*/ #if MINIX #define EVFNO2 ".bak" /* "Old" filename postfix */ #define EVMARKSHOW "Mark set" #define EVCCOL (33) /* Use this as Comment Column */ #define EVMVPCT 1 /* 1% - Try to use minimal window repositioning */ #define EVMODWSO 1 /* Use mode window standout if can */ #define STRERROR 1 /* Say that implementation provides strerror() */ #include #include #include #include #endif /*MINIX*/ #if ONYX #define STKMEM (4*512) /* ONYX Z8000 seems to have less room avail */ #endif /*ONYX*/ #if BSD4_2 #define FNAMELEN 255 /* Max size of last filename component */ #define FNAMSIZ 400 /* Max size of complete filename */ #endif /*BSD4_2*/ #if TOPS20 #define EVHELPFILE "elle:help.dat" /* T20 ELLE help file */ #define EVPROFBINFILE "ellep.b1" /* T20 binary profile file */ #define EVPROFTEXTFILE "ellep.e" /* T20 ASCII profile file */ #define EVFNO2 0 /* No old filename postfix (T20 has generations) */ #define EVFNN2 0 /* No new filename postfix (T20 has generations) */ #define FNAMELEN (40*3) /* Max size of non-directory filename component */ #define FNAMSIZ (40*5) /* Max size of complete filename */ #define STRERROR 1 /* Say that implementation provides strerror() */ #endif /*TOPS20*/ #if VENIX86 #define TIBFSIZ 1 /* Venix86 block reads in raw mode */ #endif /*VENIX86*/ /* Configuration settings */ #if ICONOGRAPHICS #define EVFNO2 "@" /* "Old" filename postfix */ #define EVMARKSHOW "Set." #define PARABLOCK 1 /* Values meaningful only for ICONOGRAPHICS */ #define PARALINE 2 #define TXC_VISBEL 1 /* Use visible bell if possible */ #endif /*ICONOGRAPHICS*/ #if IMAGEN #define EVFNO2 ".BAK" /* "Old" filename postfix */ #define EVMARKSHOW "Mark set" #define TOBFSIZ (10*80) /* Size of TTY output buffer */ #define ECHOLINES 2 /* Use 2 echo-area lines, not 1 */ #define MAXARGFILES 10 /* Several startup filename args */ #endif /*IMAGEN*/ /* Now set any defaults for things not already defined */ /* TERMINAL SUPPORT SWITCHES */ /* Only those terminals which have a switch defined here */ /* will be included in ELLE's "hardwired" support. */ /* Switch name: Compiles support for: */ #ifndef TX_TERMCAP #define TX_TERMCAP 1 /* * - most TERMCAP-defined terminals */ #endif #ifndef TX_H19 #define TX_H19 1 /* "H19" - Heath/Zenith-19 */ #endif #ifndef TX_DM2500 #define TX_DM2500 1 /* "DM2500","DM3025" - Datamedia 2500 */ #endif #ifndef TX_COHIBM #define TX_COHIBM 0 /* "COHIBM" - Coherent IBM-PC console */ #endif #ifndef TX_TVI925 #define TX_TVI925 0 /* "TVI925" - TeleVideo 925 */ #endif #ifndef TX_OM8025 #define TX_OM8025 0 /* "OM8025" - Omron 8025AG */ #endif #ifndef TXC_VISBEL /* Non-zero if want to use visible bell */ #define TXC_VISBEL 0 #endif /* Default terminal type string, used if ELLE cannot get type either ** from $TERM or from startup args. */ #ifndef TXS_DEFAULT #define TXS_DEFAULT "H19" /* Default terminal type string */ #endif /* Combination parameter/switch definitions */ /* STKMEM - System-dependent stack allocation crock, defines amount of * stack memory to grab for general-purpose use. This is mainly * useful for PDP-11s or machines with similarly brain-damaged * address space hardware. A PDP-11 memory segment is 8K bytes, * or 16 512-byte blocks, and the stack segment quarantines all of * this space even though the actual stack may only use a miniscule * portion of it. */ /* Use this if compiling for a PDP11 system, otherwise leave undefined.. */ #if (V6 || 0) #define STKMEM (8*512) /* Use half a PDP11 segment */ #endif /* These defaults are in eesite.h so ELLEC can get at them too. */ #ifndef EVPROFBINFILE /* Location of binary user profile, relative to HOME */ #define EVPROFBINFILE ".ellepro.b1" #endif #ifndef EVPROFTEXTFILE /* Location of ASCII user profile (used by ELLEC) */ #define EVPROFTEXTFILE ".ellepro.e" #endif